Wheelock MT4-12-LS Instrukcja Naprawy Pobierz pdf (Strona 10)

– 10–

CABINET DOOR BOTTOM

RETAINER

CLIP

RETAINER CLIP

(NOTE POSITION)

RETAINER

SLOTS

LOCKED

UNLOCKED

Figure 1. Installing The Cabinet Lock

1. Remove the cabinet door. It is

easily removable for servicing

and is easily re-installed.

2. Remove the lock knockout from

the control cabinet door. Insert

the key into the lock. Position

the lock in the hole making cer-

tain that the latch will make

contact with the latch bracket

when the door is closed.

3. Hold the lock steady, and insert

the retainer clip into the

retainer slots. Position the clip

as illustrated in order to permit

easy removal.

Before installing the cabinet's contents, remove the metal cabinet knock-outs

required for wiring entry. Do not attempt to remove the knockouts after the

circuit board has been installed.

Mounting The Control's Circuit Board in The Cabinet

1. Hang three black mounting clips (provided) on the raised cabinet tabs (see

Detail B in Fig. 2).

2. Insert the top of the circuit board into the slots at the top of the cabinet.

Make sure that the board rests on the correct row (see Detail A ).

3. Swing the base of the board into the mounting clips and secure the board to

the cabinet with the accompanying screws (see Detail B in Fig. 2).

DETAIL B

SIDE VIEW OF SHORT

MOUNTING CLIPS

DETAIL A

SIDE VIEW OF

BOARD INSERTED

INTO SLOTS

Figure 2: Mounting the 5110XM PC Board

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Wheelock MT4-12-LS Instrukcja Naprawy Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Wykrywacze dymu Wheelock MT4-12-LS